MAP VIEW

Panning the map

You can pan the map by clicking Pan  in map tools. Hold down the left button of your mouse and move the mouse pointer across the map to pan the map. This enables you to move the map in the background, for example, when you are drawing a new duct.

Coordinates

The coordinate section displayed in the bottom-right corner shows the map coordinates for the location of the mouse pointer if the checkbox Coordinate reading on/off  to the right of the coordinates is selected. You can turn coordinate reading off by deselecting the checkbox. Coordinates are visible in the field, with the first one being the east coordinate and the second one the north coordinate. The coordinate values are separated by a single space.

Centre map on given coordinates

1. Enter (or paste from the clipboard) the coordinate values in the coordinate field. Note that the east and north coordinates are separated by a single space.
2. Deselect the Coordinate reading on/off checkbox to prevent the coordinate values from being updated when you move your mouse pointer on the map.
3. Click Center map on the given coordinates.

Placing an object at the given coordinates

1. Deselect the Coordinate reading on/off checkbox.
2. Enter (or paste from the clipboard) the coordinate values in the coordinate field.
3. You can now place any point-type object at these coordinates in the following way:
4. On the object form that is created, click Create or Modify.
5. Click Center map on the given coordinates.

Picking the coordinates of an object

You can pick the exact coordinates of an object in the following way:

1. Select the Coordinate reading on/off checkbox.
2. Position the mouse pointer over the object. The exact object coordinates are displayed in the coordinate field.
3. Press the space bar on your keyboard to deselect the Coordinate reading on/off checkbox.
4. This prevents changes to the coordinate values and you can copy the values to your clipboard.

Changing between coordinate systems

Have the coordinate section display the desired coordinate system by selecting the correct coordinate system from the drop-down menu. The selected coordinate system is used for all functions.

KeyAqua uses a default coordinate system that is displayed in the Coordinate system drop-down menu in bold.

Coordinate elevation (Z coordinate)

The value in the coordinate elevation field to the left of the coordinate field defines the object elevation when objects are created. If the Active Z value checkbox to the left of the elevation field is selected, the field value also defines the coordinate of the new point when snapping to objects. If you want to keep the existing elevation of an object when you edit its location, or if you want to use the elevation of the object you snap to when creating a new one, deselect the Active Z value checkbox.

You can find further information on snapping to objects and following in the section Snapping and following (settings for drawing and modifying).

Snapping and following (settings for drawing and modifying)

When you create a new object or modify the geometry of an existing object, you can snap to or follow an existing object. When you do that, either the Drawing options or Modifying options form is displayed. This chapter explains how to use the Drawing and Modifying options. The other sections often refer to this chapter, as the basics of drawing and modifying options for map objects are explained in this chapter.

The Snapping selection list includes two options: Point and Nearest. If you select Point, you can only snap to the existing points of objects. If you select Nearest, you can snap to the nearest point on the next object.

When you digitize a new line object, you can follow the route of another line object if you select either Completely or Partially from the drop-down menu for Following. You can follow an object by double-clicking it in the Object selection pop-up window. If you selected Completely, all vertices of the followed object are included in your new object. If you selected Partially, you can follow the object for as long as you want. Click on the map to define the point where you want to stop following.

Change the Distance (m) value to follow the route of a line object for the distance you choose. The default distance is 0 metres.

Drawing options and duct elevation

Edit the Drawing options to define the elevation of the duct you want to connect to a node. The duct node in question is assigned the value you enter in the Start node/elevation and/or End node/elevation fields. An example: Entering the value 45 m in the field and snapping to a node that has its bottom at 42 m and its lid at 46 m will result in the connection elevation of the duct being 45 m. In this case, the elevation of the equipment that is connected does not affect the node elevation.

If the -h checkbox next to the field is selected, the elevation of the duct node will be determined on the basis of the elevation of the node you want to connect, so that the head of the duct is lower in accordance with the value entered in the field. An example: When drawing a duct, enter the value 5 in the Start node/elevation field, select the -h checkbox and snap to the node with the head of the duct. The elevation of the node’s lid is 50 m, which results in the duct’s start node having an elevation of 45 m. Note! With manholes, the -h distance is compared to the manhole’s lid, but other equipment, such as valves, only has one elevation value, which is used to determine the elevation.

If you select the Use node coord. checkbox, the elevation of the head of the duct will be determined directly in accordance with the node you are connecting. For a manhole, the elevation of its bottom is used, whereas for other equipment, the node elevation is used. If you do not specify the elevation in the drawing settings, the software will retrieve the node elevation in the following order, as applicable: 1) the Elevation fields on the Duct form 2) the elevation of the node that you want to connect and 3) active Z (see the section Coordinate elevation (Z coordinate). If elevation has not been defined for any of these, the elevation of the duct node will be 0.

Drawing options can only be used to affect the elevation of start and end nodes of new ducts. The elevation of the points of a duct that you draw are always determined based on the current active Z value. If you want to modify the elevation values of an existing duct, the best way is to do so with the tools: Node ducts and elevations and Height profile.

Changing scale

You can zoom the map by clicking Zoom in . This zooms the map in while the map center remains the same. Zooming in is carried out one scale level at a time. You can also zoom in using your mouse wheel. When you scroll the mouse wheel away from yourself, the map zooms in, and the map center is the mouse pointer’s position on the map.

TIP: You can also zoom in on the map by holding down the Shift key and using the left mouse button to select the map area on which you want to zoom in. The map is zoomed in when you release the left mouse button. This is a fast way to zoom in to a larger scale.

You can zoom the map out by clicking Zoom out . This zooms the map out while the map center remains the same. Zooming out is carried out one scale level at a time. You can also zoom out by scrolling the mouse wheel towards you. The mouse pointer’s position on the map is used as the map center.

You can restore the map view to the default view by clicking Zoom to max extent . Click Zoom to area  to define the area that is used for zooming in. Use the left mouse button to define the area on the map. The map is zoomed in when you release the mouse button.

You can select the desired display scale from the Display scale menu. The selected scale is displayed in bold letters. The map is automatically updated to the selected scale.

Using the placement scale for new objects

If you already know, when creating an object, that the printouts for the area will be created using a specific scale, you can use the placement scale when creating the object. For sparsely populated areas, for example, printouts may be created using a smaller scale than the one used for city areas, and individual objects then may not be clearly visible on the printouts. You can ensure the visibility of objects by using the correct placement scale.

In the Placement scale menu, select the scale that will be used for creating printouts. New objects will be created at a size proportional to this scale, and individual objects will thus be visible, for example, in a printout with a 1:2000 scale.

In the example picture, the placement scale and the map symbols are selected with different placement scales (500, 1000, 2000, and 10 000) when the scale of the image is 1:2000.

Measuring distance, area size, and perimeter

You can measure distances using the Distance  tool. Click Distance and position the mouse pointer over the starting point on the map to start measuring. Click the left mouse button and move your pointer on the map. Enter points by clicking the left mouse button. Distance is displayed in the bottom left corner of the screen. The distance information is updated after adding each point. End the measuring by first clicking the left mouse button and then the right mouse button. Check the total distance.

Measure the area size and perimeter by selecting Area size and perimeter on the Distance drop-down menu. Add points on the map to view the area and perimeter information for the polygon formed by the points and the mouse pointer. This area information is displayed in the bottom left corner of the screen. Stop drawing by clicking the right mouse button, and check the complete area size and perimeter information. Click the left mouse button or Pan  in Map tools to start a new measurement.

Info tool

You can use the Info  tool to view information on map objects. Click Info and then use the left mouse button to click the selected object shown on the map. You can only select objects that are visible on the map; in other words, only the activated object layers are available. You can retrieve information on more than one object at the same time. There are several possible ways to retrieve information on multiple objects.

TIP: You can double-click an object on the map using the left mouse button, to view the object’s information. The application then displays a separate object form on which the object’s information is displayed. If there are multiple objects in the area you double-clicked, they are listed and you can choose the object you want to view.

You can define a rectangular area by selecting the area you want by holding down the left mouse button.

From the drop-down menu next to the Info tool, you can select one of the following three functions: Map view area, Free area, or Existing area. When you select Map view area, the software retrieves information on all objects currently displayed on the screen. You can use the Free area function to define a free-form area on the map.

You can use the Existing area function to select an area that has been saved in the system using the Area function, and to retrieve the objects in that area.

The query returns an Info list in which the search results are grouped according to their object type, such as water ducts and sewer nodes. The information displayed is basic information on the network objects, such as such as ID, type, owner and usage state. The number of results is displayed at the bottom of the window. If the number of results is large, use the arrow buttons at the bottom of the window to browse through them.

Click Show  to center the map on an object that is highlighted in the map. Click Edit  to edit an object’s information. This button displays an object form that includes the object’s detailed property information.

TIP: You can limit your search to specific objects by using object layer selection. For example, in the Layers tool, select only the Water Networks layer to limit your search to the water supply network.

Exporting data and reporting on map objects

1. Use the Info tool to select objects on the map.
2. Click Export to create a Bill of Materials for the group of selected objects or, alternatively, to create a location map of the objects in an external file format.

View the results of the Info query in a Group display

1. Select objects on the map as described above.
2. Click Show in group display  to view the selected group of objects as a group of Info tool objects. The chapter Group display provides further information on the group display.

Map views

You can save the current map view by clicking Map views . You can create a new map view using the Map views form. You can edit, name, and save map views as necessary, and then return to the map view that you want to view by clicking Restore view . You can save several map views and select the map view you need from the drop-down menu. The view you select is then displayed.

Select the Default checkbox to define a default map view. The map selected as the default map will be displayed as the initial view the next time you log into the system. When Remember my position is selected, the KeyAqua application saves the map location, zoom level, and open map layers. The next time you log in, you can continue from where you were the previous time. 

You can also click Previous view  to return the previous view. This always takes you back to the previous view, one view at a time. Click Next view  to go to the next view.

Map link

Use the Map link  tool to copy the current map view and send a URL to your colleague or partner company.

1. Click Map link in Map tools.
2. Either select the long form or shorten it by selecting the Shorten checkbox.
3. Copy the address.
4. Paste it into an email or add it as a browser bookmark.

To return to the view later, copy the address into your browser’s address bar or use the bookmark you saved.

Refreshing the map

You can view the changes made to a map by clicking Refresh map. This function is useful, for example, when the map data is being updated at the same time on another workstation, in which case changes are not necessarily immediately visible in the area that you are viewing.

Google Maps

The services mentioned in this chapter are provided by Google. View the current map view area on the Google Maps™ website: Click Google Maps  to open a new browser tab to view the current KeyAqua map view on the Google Maps website.

You can view a street view using the Google Maps Street View™ service:

1. In the Google Maps drop-down menu, select Google Maps Street View.
2. Point to the road/street location that you want to view and click to open the view in question in Google Maps Street View.

Street Smart View (this function is subject to a separate order)

The Street Smart View function in the Google Maps drop-down menu provides a 360-degree street view that is true to size. With the street view, you can easily manage street, road, and infrastructure assets. The BlomStreet cloud service is an additional feature that is to be deployed separately.

Layers (Layer selection)

You can select the background map and network object layers using the Layers tool. Click Layers  in the Map tools to view the list of objects. The available map layers depend on the customer and what has been agreed concerning the available maps.

You can minimise or maximise the Layers tool by clicking the arrow at the top of the form. You can close the form by clicking the cross. You can hide the lists of background maps

and lists of object layers by clicking  in front of the row, and you can expand them by clicking .

Selecting the background map

The default map is one of the available maps. You can also select some other map as the default map, or you can select the option Empty, in which case no background map is displayed. Only one map at a time can be selected as the background map. The background map helps users understand where the network objects are located, and this map cannot be modified.

Object layers

The network object layers available for selection are listed under object layers. You can select multiple layers to be shown at the same time. If an object layer is not selected, its objects are not displayed on the map and it is therefore not possible, for example, to pick them from the map for forms. You should select, at a minimum, those layers that have objects you want to view or edit.

The object layers available for selection include the network objects (ducts and nodes) and the annotations and reports related to them. In addition, you can choose to have renovations, themes, free objects such as lines and texts, addresses, surveys, and other objects available in the layer selection list to be displayed on the map.

The checkbox  to the left of an object’s name indicates whether the object has been selected. You can remove or add an object by clicking its checkbox. You do not need to refresh the map afterwards as your selections are applied automatically. If you want to activate all layers at once, select the checkbox for the highest layer (Layers).

The number of objects visible on the map is proportional to the speed with which the map is refreshed. For this reason, we recommend that you only select the layers you need to view on the map.

Sub-layers of the layer hierarchy (a function subject to a separate order)

The layer hierarchy can be created on the basis of the object’s attribute data. For example, the lower layers of a district heating network could be heating and cooling. The creation of environment-specific sub-layers is possible through a function that is subject to a separate order.

Thematics

The various map objects can be shown on the map according to different property attributes. Themes highlight objects on the map, for example, based on network usage state or technology. To display theme legends, use the left mouse button to click Show legend next to the name of the theme or click the right mouse button and select Show Legend on the displayed menu. If a legend is not available, the button and the menu item are hidden.

The Legend window that is displayed explains the theme colours and the related legends, such as sewer duct fault classification.

The Legend list works in a manner similar to stacks: when a new legend or theme is selected in the layer selection, a new group is added on top of the list. You can expand or minimise groups by clicking  and  or by double-clicking the group header. You can hide a group by clicking .

Configuring object layers

You can configure the layers into separate groups using the application user interface. You can group similar layers into one group, for example, group all KeyAqua objects under

one layer, thus making it possible to view or hide them with a single click. Only users with administrator rights can configure the layers using Configure .

On the Layers form, click Configure  at the top to group object layers. You can configure layers when the background colour of the form changes to orange.

Use your mouse to drag layers to a new location on the list. For example, you can move the WS Ducts layer to the Sewer network group by grabbing the WS Ducts layer with the left mouse button and dragging it to the top of the Sewer network group.

You can move layers that you do not use and hide them in the Ungrouped layers group. This Ungrouped layers group appears at the end of the list when the layer configuration function is activated.

Layer configurations

You can save a Layer configuration, that is, the selected background map and the active layers, by clicking Save  in the top-right corner of the Layers tool. Layer configurations are saved in the browser cache, and therefore they are not available on other computers.

Layer configurations can also be saved in a database with a user name, in which case the layer configuration is user-specific instead of browser-specific. Save a layer configuration in a database by clicking Configure , and wait for the background colour to change to orange. Click Save  to save the layer configuration in a database.

Upload the saved layer configuration to the Layers form by clicking Reload . You can restore the original layer configuration settings by clicking Reset to defaults .

Layer filters

Layer filters  are used for limiting the number of objects shown on the map. Objects can be filtered based on usage state and plan. When filters are used, only the objects selected on the filter form are visible on the map.

Active filters are marked in the layer selection list: A filtered layer is marked with a highlighted filter symbol . When a filter is not selected, the icon is not highlighted .

Printing

Use the Print  tool for print series and quick print. Print series refers to printouts that consist of one or several parts, whereas quick print enables you to quickly create a printout of the map.

Quick print

In the Map tools bar, click Quick print  to access the Quick print function. In print settings, you can define settings related to paper size and the display settings for the detailed information to be included in the printout.

Start quick print by filling in the form. The form fields Paper size and DPI must be completed to match the paper and printer you are going to use. Paper size means the physical size of the printing paper. In the Scale 1: field, enter the size of the print area as a scale proportion. When the display scale is 1:500, and the same scale is applied to the printout, the printout proportions are the same as in the map view.

You can include a print legend (Legend) and a Theme legend on the printout. You can also define their location on the printout. The Print legend refers to the map legend, which includes information on the paper type, scale, person creating the printout, and date of printing. You can add your own text in the Note field.

You can include a Theme legend on the printout by going to the Layers list and activating those theme levels that you want to include. In the drop-down menu for the theme legend, select the location of the legend. The Theme legend on the printout will include the same information as the Themes – Show legend window.

The borders of the print area (the frame limits) move with the mouse pointer. When you click Quick print, the Frame digitizing options and Frame options selections are displayed. In Frame digitizing options, you can select the snapping point of the movable printing frame by moving it while holding down the SHIFT key. Select Point for snapping if you want to move the point to the same location as an existing point. Select Nearest for snapping if you want to position the point on top of a line object. This moves the point to the nearest snapping point on the closest line object.

In the Frame options window, you can modify the orientation and rotation of the print area on the page. The changes you make are applied immediately to the frame shown on the map.

Use the left mouse button to select the desired location of the frame and print it using the right mouse button, or click Print  on the form to have the browser provide the file in PDF format for downloading.

To relocate the frame, use your left mouse button to point at the red square in the middle of the frame and, while holding the button down, drag the frame to the location you want. Click Print to print.

TIP: Depending on your browser settings, you may see a notification that the page is trying to open a pop-up window after approving the printout. You must allow pop-up windows in order to enable printing.

Print series

The difference between print series and quick print is that a print series consists of several map printouts (frames). The first page of a print series includes an index map showing all the map printouts, and it provides an overview of the individual frames with their numbers and locations. This feature helps to locate the various series printouts on the map. Activate the Print series function in the Print drop-down menu .

The Print series form includes fields for settings and a field for the printouts (frames). The first row of the list of frames is always the title page, and the actual frames are listed below it. The settings information displayed in the form’s fields is related to the frame that is active in the list of frames. You can edit and save printout-specific information. You can also create printouts of single frames.

Fill in the form fields as described for Quick print. After this, click Save form to activate the creation of frames. Click Create to start creating map frames. The borders of the print area (frame) move along with the mouse until you select the map location you want by clicking the left mouse button. When you create a print series, the Frame options and Frame digitizing options are also displayed. Please see the chapter Quick print for more details on these.

Click the right mouse button to accept a frame. A new printout line is added to the list of frames on the form. The number of frames is not limited. You can also edit the settings for each frame; for example, you can modify the scale of the printout.

In the figure, two frames (blue rectangles) have already been added to the map and it is about to be grabbed with a two-frame matrix (the orange rectangle with blue circles in the corners.

You can download the Print series in PDF format by clicking the Print button on the form. The browser will provide a PDF file for download, and this file includes the entire print series. Print a single frame by selecting Print selected in the drop-down menu for the Print button. The frame selected in the list of frames is printed. Alternatively, you can print a frame by clicking a frame on the Print form using the right mouse button and selecting Print selected. The menu also includes options for locating, highlighting, and deleting a frame.

You can also use the Quick print function on the Print series form. The drop-down menu for the Print button includes the option Quick print.

TIP: The print series are stored in the database until they are deleted. This lets you print the same series later.

Locating yourself

The Locate  tool enables you to center the map based on the location of your equipment. Depending on the functions of your equipment, your location can be based on, for example, GPS coordinates or the location information obtained from a wireless or fixed network. Centering the map based on the network location information may be extremely inaccurate. A cross symbolising the location and a circle representing the margin of error are shown on the map.

The Locate feature allows you to center the map on either the location of your GPS signal, or based on your network location. Centering the map based on the network location information may be extremely inaccurate.

Splitting your display

With the Split map  tool, you can split your display into two or three sections to view the map in one section and the forms in others, so that they are not on top of the map. Use the tool options to select whether you want to have the new display section on the left or right side of the map view, or on both sides. You can deactivate the Split map function using the Cancel command in the tool.

TIP: This is a very useful tool if you are using more than one monitor!